Pulnix TMC-6DSP Manuel d'instructions télécharger pdf (Page 17)

INSTALLATION

TMC-7DSP/TMC-6DSP Color CCD Camera Page 11

Note: Make sure that the power is removed from the camera before connecting or

disconnecting the auto-iris lens. There is a small chance that damage could occur to

the auto-iris lens by plugging or unplugging it while the camera is powered up.

Power down the camera before installing the auto-iris lens. Point the camera at a light area and then

quickly towards a darker area. If everything is working properly, the iris should adjust for the light

change.

2.2.7 Monitor Display Mode

For monitoring real time video, connect the video output to a video monitor or other device.

2.3 Camera Alignment and Adjustment

2.3.1 Equipment

2.3.1 (a) Light Source for Test Chart

Pattern Box PTB-500 (90-130V)

PTB-220 (190-240V) (not used in the U.S.)

2.3.1 (b) Video and Gamma Adjustment

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Pas de commentaire

Pulnix TMC-6DSP Manuel d'instructions Page 17