Pulnix TS-9720EN Series Manuel d'instructions télécharger pdf (Page 24)

Page 16

Tutorial

TS-9720EN Series Progressive Scan Shutter Cameras

3.3 ADR (Automatic Dynamic Range) Control

3.3.1 Light Sensor Connection

ADR control is a process that runs inside the EN camera. It controls the camera every 1/10 second to

ensure that when the camera is triggered, it produces a high quality image of the license plate and the

vehicle it is mounted on, in all ambient lighting conditions. The ADR also decides when to turn on/off

auxiliary lighting as required to maintain proper plate illumination at night and during dawn/dusk

transitions. ADR uses an external light sensor to provide the information required to operate properly.

ADR operation can be enabled/disabled by the user at any time. Make sure to set up Moxa (RS-485 to

Ethernet converter) properly. See (VIS300 manual Appendix A).

In the camera’s “Properties” window, set up the light sensor’s IP address and Port number. These

numbers must be consistent with Moxa’s setting.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

Pas de commentaire

Pulnix TS-9720EN Series Manuel d'instructions Page 24