Pulnix TM-7EX Informations techniques télécharger pdf (Page 16)

OMI 2.3.1 Release Notes

16 OMI 2.3.1 Release Notes

Caution Cable 300-0316 and adapter 300-0313 are for use with the Sony

XC-ST50 family of cameras only. Do not connect these cables to

other Sony cameras such as the XC-75 or XC-55 or you may

damage your CVM module, your camera, or both.

CVM4 Supported Cameras

CVM4 is a camera video module for the Cognex CVC-1000 camera. The CVC-1000 is a

high-speed, lightweight camera that requires the camera control functions resident in a

separate CVM module. The CVC-1000 camera can be used only with a CVM4 module.

CVM4 can support simultaneous image acquisitions on up to four CVC-1000 cameras.

CVM4 supports a single camera, the Cognex CVC-1000, which is connected using the

Cognex cable shown in Table 6.

Sony XC-ST50CE

CCIR With switches in rapid reset

mode; half resolution

300-0136 plus

300-0313 adapter

300-0316

See caution below

Pulnix TM-9701 EIA

RS-170

Rapid reset, progressive

scan; full resolution

300-0127

Pulnix TM-7EX EIA

RS-170

Interlaced, full, half, or

single-field resolution;

camera must sync to vision

processor

300-0127

Toshiba IK-M41MA 300-0208

Camera

EIA /

CCIR Notes

Cognex Camera

Cable Part Number

Table 5. CVM1 supported cameras and cables

Camera

Cognex Breakout Cable

Part Number

Cognex Camera Cable

Part Number

Cognex CVC-1000

Four-camera breakout

cable, 300-0220

300-0223

One-camera breakout

cable, 300-0224

Table 6. CVM4 camera cable part numbers

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Pulnix TM-7EX Informations techniques Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Pulnix TM-7EX