Pulnix TM-7EX Informations techniques télécharger pdf (Page 51)

OMI 2.3.1 Release Notes

OMI 2.3.1 Release Notes 51

Image Object

CCIR Formats Different Size on MVS-8100 and

MVS-8110

If you use a CCIR-format camera on the MVS-8100 or MVS-8100C, the full-resolution

images are 768x570 pixels; half-resolution images are 768x285 pixels. With an

MVS-8110, full-resolution CCIR images are 768x574 pixels; half-resolution images are

768x287 pixels.

May Need to Adjust CTI Offset For XC-75CE on

MVS-8100

You may experience black image fields when acquiring images from a Sony XC-75CE

camera using the MVS-8100. These failures can occur once every 500 to 1000

acquisitions when using triggered acquisition at a trigger rate of 15 Hz.

You can prevent this problem from happening by setting a value of 24 in the CTI Offset

field on the Trigger/Strobe tab of the Image dialog, or using the Image object’s

SetCtiOffset() function.

KP-F100: OMI Hangs If Selected Port Has No

Camera

If you configure an Image object for the KP-F100 camera, then select a camera port that

has no camera attached, your system will hang. If you connect the KP-F100 camera after

OMI hangs, OMI detects the camera and resumes operation.

Color Camera Ports Confusing on MVS-8100C

Color cameras can only be connected to camera ports 1 and 3 on the MVS-8100C,

leaving ports 0 and 2 unused, as described in the MVS-8100C Hardware Manual.

However, with a correctly-connected color camera on port 1, OMIWin incorrectly

provides access to the camera’s settings through an Image object configured (in the

Image object’s dialog box or using its SetCamera function) to use either Camera 0 or

Camera 1. Likewise, for a correctly-connected color camera on the board’s port 3,

access to the camera’s settings is possible through an Image object configured to use

either Camera 2 or Camera 3.

This makes possible the confusing situation where the settings of one camera are

controlled by two Image objects using, at least apparently, two different cameras. To

avoid the errors that might result from such confusion, we recommend that you

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

Pas de commentaire

Pulnix TM-7EX Informations techniques Page 51