Pulnix TM-7EX Manuel télécharger pdf (Page 19)

1 Installing the MVS-8100C

Cognex MVS-8100C Hardware Manual 19

Figure 8 shows the back panel of the Sony XC-ES50 camera with the switches in their

factory default position.

Figure 8. Sony XC-ES50 camera back panel

To configure the switches for the Sony XC-ES50 camera:

1. Configure the 10-position DIP switch as shown in Figure 8.

Note You can set switch 5 to ON in factory default mode to use field

integration rather than frame integration (single field and

half-resolution video formats only).

2. Set the manual gain switch in the fully vertical position.

3. Set the HD/VD switch to external (EXT).

Set the 75Ω switch to ON.

Configuring Sony XC-ST50 Cameras

The MVS-8100C supports the use of the Sony XC-ST50 cameras. If you purchase your

XC-ST50 cameras from Cognex, they arrive ready to use with the MVS-8100C. If you

purchase your XC-ST50 from a third party, you must configure the camera as shown in

this section.

75Ω

VIDEO OUT/DC IN/SYNC

SHUT

FR/FL

TRIG

MAGC

MIN

MAX

GAIN

EXT

INT

HT/VD

OFF

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Pas de commentaire

Pulnix TM-7EX Manuel Page 19