Pulnix TM-7EX Manuel télécharger pdf (Page 40)

Cognex MVS-8100C Hardware 3

40 Cognex MVS-8100C Hardware Manual

Camera Expansion Header

If you are creating your own cable for the camera expansion header, use the pinout

information in this section.

Figure 16 shows the pin numbering for the internal camera expansion header.

Figure 16. Pin numbering of internal camera expansion header

Table 15 provides the pinout for the internal camera expansion header.

Pin Signal Name Pin Signal Name

1 No connect 2 Video (monochrome), CAM2

3 Rapid reset out, CAM2 4 +12 VDC (CAM2 power)

5 GND (+12V return) 6 No connect

7 GND (Video) 8 No connect

9 +12 VDC (CAM2 power) 10 GND (+12V return)

11 Shield 12 HDRIVE Ground, CAM2

13 HDRIVE Signal, CAM2 14 VDRIVE Signal, CAM2

15 VDRIVE Ground, CAM2 16 Shield

17 Video (Red), CAM3 18 Video (Green or Mono), CAM3

19 Video (Blue), CAM3, or rapid

reset line out, CAM3 (set by J7)

20 +12 VDC (CAM3 power)

21 GND (+12V return) 22 GND (Video)

23 GND (Video) 24 GND (Video)

25 +12 VDC (CAM3 power) 26 GND (+12V return)

Table 15. Pinout of the internal camera expansion header

246 30

135 29

Top edge

of board

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

Pas de commentaire

Pulnix TM-7EX Manuel Page 40