Pulnix TM-7EX Manuel télécharger pdf (Page 38)

Cognex MVS-8100C Hardware 3

38 Cognex MVS-8100C Hardware Manual

The fuse at board position F9, Cognex P/N 121-0036, is Littlefuse part number 47303.5,

Pico Fuse 3.5 A Slow Blow.

Camera Ports

The MVS-8100C receives analog video signals through four video input ports referred

to as cameras 0, 1, 2, and 3. Each video port is capable of supplying power and

synchronization signals to its camera.

Cameras 0 and 1 connect through high-density, 15-pin, HD-15F connectors located on

the MVS-8100C’s back panel. Cameras 2 and 3 connect through HD-15F connectors

located on the camera port expansion panel (P/N 300-0245).

When the MVS-8100C is jumpered for use with color cameras, camera ports 0 and 2 are

not used. Only ports 1 and 3 are used for connecting color cameras. Consequently, the

pinout for camera ports 0 and 2 differs from that of ports 1 and 3.

The pinout for camera ports 0 and 2 is shown in Table 13.

Pin Signal Name Pin Signal Name

1 No connect 9 +12 VDC, camera

2 Video (Monochrome) 10 GND (+12V return)

3 Rapid reset line out 11 Shield

4 +12 VDC, camera 12 HDRIVE Ground

5 GND (+12V return) 13 HDRIVE Signal

6 No connect 14 VDRIVE Signal

7 GND, video 15 VDRIVE Ground

8 No connect

Table 13. Pinout for camera ports 0 and 2

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Pas de commentaire

Pulnix TM-7EX Manuel Page 38